Monitor Connections - Interlogix TruVision DVR 12 User Manual

Figure 1: TVR 12 back panel connections (16-channel model shown)
1. Loop through for up to 16 analog cameras
(depends on recorder model).
2. Connect to a RS-232 device.
3. Connect up to four alarm inputs.
4. Connect one alarm relay output.
5. Connect four audio inputs to RCA
connectors.
6. Connect up to 16 analog cameras to BNC
connectors (depends on the recorder
model).
7. Connect to an optional USB device such as
a mouse, CD/DVD burner or HDD. The
recorder supports both a USB DVD and a
USB HD on the front and rear USB ports.

Monitor connections

Connect a monitor to one of the recorder's outputs (BNC/VGA/HDMI). The
recorder provides a 1 Vp-p CVBS signal. See Figure 1 above for connecting a
monitor to a recorder.
The recorder supports up to 1920 × 1080 / 60 Hz resolution in VGA. The monitor
resolution should be at least 1024 × 768. Adjust your monitor accordingly to this
resolution.
TruVision DVR 12 User Manual
8. Connect one CCTV monitor (BNC-type
connector).
9. Connect to a HDTV. The HDMI connection
supports both digital audio and video.
10. Connect to a VGA monitor.
11. Connect to speakers for audio output.
12. Connect to a network.
13. Connect to a RS-485 device such as a PTZ
camera or a keypad.
14. Connect to the 12 VDC PSU (enclosed)..
15. Power switch (on/off).
16. Connect to ground.
9