Configuring Pppoe - Interlogix TruVision DVR 12 User Manual

Option
Enable DHCP
IPv4 address
IPv4 subnet mask
IPv4 default gateway
IPv6 address 1
IPv6 address 2
IPv6 default gateway
MAC address
MTU (bytes)
Preferred DNS server
Alternate DNS server
3. Click Apply to save the settings.
4. Click Back to return to live view or to continue to configure.

Configuring PPPoE

You can connect the recorder directly to a DSL modem. To do this, you need to
select the PPPoE option in the network settings. Contact your ISP to get the user
name and password.
To configure general network settings:
1. From the menu toolbar, click
2. Check the enable PPPoE box.
3. Enter your user name and password and confirm the password.
4. Click Apply to save the settings.
5. Click Back to return to live view or to continue to configure.
40
Description
Check this box if you have a DHCP server running and want
your recorder to automatically obtain an IP address and other
network settings from that server.
Default value is Disable.
Enter the IP address for the recorder.
Default value is 192.168.1.82
Enter the subnet mask for your network so the recorder will be
recognized within the network.
Default value is 255.255.255.0
Enter the IP address of your network gateway so the recorder
will be recognized within the network. This is typically the IP
address of your router.
Default value is 192.168.1.1
Enter the IPv6 address for the recorder.
Default value is: It depends.
Enter the IPv6 address for the recorder.
Enter the IPv6 address of your network gateway so the recorder
will be recognized within the network. This is typically the IP
address of your router.
Enter the MC address.
Enter a value between 500 and 1500. Default is 1500.
Enter the preferred domain name server to use with the
recorder.
Enter the alternate domain name server to use with the recorder.
Network Settings > PPPoE.
TruVision DVR 12 User Manual