Configuring Email - Interlogix TruVision DVR 12 User Manual

To set up an NTP server:
1. From the menu toolbar, click
2. Check the NTP box to enable feature. It is enabled by default.
3. Enter the NTP settings:
• Interval: Time in minutes to synchronize with the NTP server. The value
can be between 1 and 10080 minutes. Default is 60 minutes.
• NTP server: IP address of the NTP server.
• NTP port: Port of the NTP server.
4. Click Apply to save the settings.
5. Click Back to return to live view or to continue to configure.

Configuring email

Your recorder can send email notifications of alarms or notifications through the
network.
Note: Ensure that the DNS address has been set up correctly beforehand.
To configure email settings:
1. From the menu toolbar, click
2. Enter the required settings.
Option
Enable Server
Authentication
SMTP Server
SMTP Port
Enable SSL
Sender
Sender's Address
Select Receivers
Receiver
Receiver's Address
Enable Attached
Snapshot
Interval
TruVision DVR 12 User Manual
Network Settings
Network Settings
Description
Check the box if your mail server requires authentication and
enter the login user name and password.
Enter the SMTP server's IP address.
Enter the SMTP port. The default TCP/IP port for SMTP is 25.
Check the box to enable SSL if it is required by the SMTP server.
This feature is optional.
Enter the name of the sender of the email.
Enter the sender's email address.
Select an email recipient. Up to three receivers can be selected.
Enter the name of the receiver of the email.
Enter the email address of the receiver.
Check the Attach JPEG File box if you want to send an email with
attached alarm images.
Select an interval range in the Interval box.
The interval range represents the time range in between the alarm
images being sent. For example, if you set the interval range at
two seconds, the second alarm image will be sent two seconds
after the first alarm image
> NTP.
> Email.
43