Interlogix TruVision DVR 12 User Manual page 137

2. Scroll through the menus with the
3. Change Operating Mode to Zone by moving the joystick down.
4. Quit the menu by pressing the
5. To connect it to the recorder, press the zone button and enter the ID number
of the recorder. The default value is "1".
6. To configure the recorder zone ID number, at the recorder enter the Monitor
screen by selecting
Monitor. Under Zone ID, enter the zone ID value. The default value is "1".
Note: The zone ID value must be identical for the recorder and keypad.
The recorder is now connected to the KTD-405 keypad.
Recorder and keypad functions
The KTD-405U acts as a recorder control keypad when connected to the
recorder. The keypad mimics many of the functions available from the front panel
of the recorder.
Unavailable recorder functions
The following TVR 12 functions are unavailable when using the keypad to control
the recorder:
 Export video
 Shadow tour
 Select motion detection or tampering zones
 Archive records
 Capture video
If these functions are required, it is recommended to use a mouse in conjunction
with the keypad as all recorder functions will then be available.
Unavailable keypad functions
The following keypad buttons are unavailable when using the keypad to control
the recorder:
TruVision DVR 12 User Manual
button until this menu appears:
seq button. The display will show, for example:
Display Mode Settings in the main menu and select
135