Sequencing Cameras; Accessing Frequently Used Commands - Interlogix TruVision DVR 12 User Manual

Sequencing cameras

The sequencing feature allows a camera to be displayed briefly on screen,
before advancing to the next camera in the sequence list. Sequencing can only
be done in single-view display mode.
The default sequence displays each camera in numerical order. However, each
camera on the main and auxiliary monitors can have a pre-programmed
sequence order. See "Changing the camera sequence" on page 73 for more
information.
Note: Dwell time must not be set to zero for sequencing to function.
Sequencing live view mode using the front panel:
1. Select the camera where you want to start sequencing.
2. Press the Seq button on the front panel to start sequencing.
3. Press the Seq button again to stop the sequencing.
Sequencing live view mode
1. Select the camera where you want to start sequencing.
2. Right-click the mouse and select
3. Right-click the mouse and select

Accessing frequently used commands

The quick access toolbar in live view lets you quickly access regularly used
commands. Position the cursor over a video image and left- click the mouse. The
toolbar appears (see Figure 16 on page 70).
TruVision DVR 12 User Manual
using the mouse:
Start Sequence
Stop Sequence
to start the sequencing.
to stop the sequencing.
69