Configuring Email - Interlogix TruVision DVR 12 User Manual

Interval: Time in minutes to synchronize with the NTP server. The value
•
can be between 1 and 10080 minutes. Default is 60 minutes.
NTP server: IP address of the NTP server.
•
• NTP port: Port of the NTP server.
4. Click to save the settings.
Apply

Configuring email

Your DVR can send email notifications of alarms or notifications through the
network.
Ensure that the DNS address has been set up correctly beforehand.
Note:
To configure email settings:
1. From the menu toolbar, click
2. Enter the required settings.
Option
Enable server
authentication
SMTP server
SMTP port
Enable SSL
Sender
Sender's address
Select receivers
Receiver
Receiver's address
Enable attached snapshot Check the Attach JPEG File box if you want to send an email with
Interval
3. Click to the test email settings.
Test
We recommend that you test the email settings after entering values in
Note:
the email window.
4. Click to save the settings.
Apply
We recommend that you test the email settings after entering values in the
Note:
Email window.
TruVision DVR 12 User Manual
Network Settings
Description
Check the box if your mail server requires authentication and
enter the login user name and password.
Enter the SMTP server's IP address.
Enter the SMTP port. The default TCP/IP port for SMTP is 25.
Check the box to enable SSL if it is required by the SMTP server.
This feature is optional.
Enter the name of the sender of the email.
Enter the sender's email address.
Select an email recipient. Up to three receivers can be selected.
Enter the name of the receiver of the email.
Enter the email address of the receiver.
attached alarm images.
Select an interval range in the Interval box.
The interval range represents the time range in between the alarm
images being sent. For example, if you set the interval range at
two seconds, the second alarm image will be sent two seconds
after the first alarm image
Chapter 6: Network settings
> Email.
37