Rocker Arms, Rocker Arm Shaft And Camshaft Inspection; Adjusting Screw And Rocker Arm; Rocker Arm Shaft Runout - Suzuki Swift User Manual

EX IN
10) Remove rocker arm shaft bolts (1).
2. Rocker arm shaft
11) Remove exhaust rocker arms (1) and rocker arm spring (2) by
pulling out rocker arm shaft to battery side after removing bat-
tery.
INSPECTION

Adjusting Screw and Rocker Arm

If tip of adjusting screw (1) is badly worn, replace it.
Rocker arm (2) must be replaced if its cam-riding face (3) is badly
worn.

Rocker Arm Shaft Runout

Using "V" blocks and dial gauge, check runout. If runout exceeds
its limit, replace rocker arm shaft.
Runout limit: 0.10 mm (0.004 in.)
ENGINE MECHANICAL (G13B, 1-CAM 16-VALVES ENGINE) 6A1-35