Suzuki Swift User Manual page 192

6-1-36 ENGINE GENERAL INFORMATION AND DIAGNOSIS (SFI FOR G13)
TERMINAL
NO.
1 1 Malfunction indicator lamp Malfunction indicator lamp
Vehicle speed sensor (M/T)
2
Output shaft speed sensor
(+) (A/T)
3 Blank
4 4 Shift solenoid Shift solenoid – A (A/T)
5 5 Throttle position sensor Throttle position sensor
6 Ignition switch
7 Data link connector
Output shaft speed sensor
8
(–) (A/T)
9 Blank
10 Sensor ground
11 11 Shift solenoid – B (A/T) Shift solenoid
12 Blank
13 Blank
14 Blank
15 Blank
16 Tachometer (if equipped)
Engine start switch g
17 17
(Engine start signal)
CIRCUIT
A (A/T)
B (A/T)
NORMAL
VOLTAGE
0 – 1 V Ignition switch ON
10 – 14 V When engine running
Indicator
deflection Ignition switch ON
repeated Front left tire turned slowly with front right
0 V and tire locked
4 – 6 V
0.4 – 0.8 V Ignition switch ON
—
0 V Ignition switch ON, Select lever at P-range
10 – 14 V Ignition switch ON, Select lever at D-range
Ignition switch ON
0.2 – 1.0 V
Throttle valve at idle position
Ignition switch ON
2.8 – 4.8 V
Throttle valve at full open position
10 – 14 V Ignition switch ON
— Ignition switch ON
0.4 – 0.8 V Ignition switch ON
—
—
0 V Ignition switch ON, Select lever at P-range
10 – 14 V Ignition switch ON, Select lever at D-range
—
—
—
—
0 – 1 V Ignition switch ON
6 – 12 V While engine cranking
0 – 1 V Other than above
CONDITION
—
—
—
—
—
—
—