Suzuki Swift User Manual page 305

6A1-10 ENGINE MECHANICAL (G13B, 1-CAM 16-VALVES ENGINE)
IN
IN
EX
6) If valve lash is out of specification, adjust it to specification by
EX
1. Thickness gauge
7) After checking and adjusting valve lashes at valves (1), (2), (5)
8) After checking and adjusting all valves, reverse removal proce-
360_
turning adjusting screw after loosening lock nut.
After adjustment, tighten lock nut to specified torque while hold-
ing adjusting screw stationary, and then make sure again that
valve lash is within specification.
Valve
clearance
specifica-
Intake
tion (0.005 – 0.007 in.)
Exhaust
Special Tool
(A): 09917-18211
Tightening Torque
.
(a): 12 N m (1.2 kg-m, 9.0 lb-ft)
and (7), (or (3), (4), (6) and (8)) rotate crankshaft exactly one full
turn (360_) and check the same at valves (3), (4), (6) and (8) (or
(1), (2), (5) and (7)). Adjust them as necessary.
dure for installation.
When cold
(Coolant tempera- (Coolant tempera-
ture is 15 – 25_C ture is 60 – 68_C
or 59 – 77_F) or 140 – 154_F)
0.13 – 0.17 mm 0.18 – 0.22 mm
(0.007 – 0.009 in.)
0.23 – 0.27 mm 0.28 – 0.32 mm
(0.009 – 0.011 in.) (0.011 – 0.013 in.)
When hot