Dtc P0335 Crankshaft Position (Ckp) Sensor Circuit Malfunction - Suzuki Swift User Manual

6-72 ENGINE GENERAL INFORMATION AND DIAGNOSIS (TBI FOR G10)

DTC P0335 CRANKSHAFT POSITION (CKP) SENSOR CIRCUIT MALFUNCTION

CIRCUIT DESCRIPTION
Crankshaft
timing belt pulley
DTC DETECTING CONDITION
D No CKP sensor signal during 1 revolution of
camshaft.
Reference
Connect oscilloscope between terminals C01-3 (+) and C01-11 (–) of ECM (PCM) connector connected to ECM
(PCM) and check CKP sensor signal.
Oscilloscope Waveforms
DTC CONFIRMATION PROCEDURE
1) Clear DTC, start engine and keep it at idle for 1 min.
2) Select "DTC" mode on scan tool and check DTC.
CKP
sensor
2V/Div.
5ms/Div.
Waveforms at specified idle speed
POSSIBLE CAUSE
D CKP sensor circuit open or short.
D Crankshaft timing belt pulley teeth damaged.
D CKP sensor malfunction, foreign material being
attached or improper installation.
D ECM (PCM) malfunction.