Vehicle Speed Sensor (Vss); Fuel Level Sensor (Gauge); Main Relay, Fuel Pump Relay And Radiator Fan Control Relay - Suzuki Swift User Manual

ENGINE AND EMISSION CONTROL SYSTEM (SFI FOR G13) 6E2-33

VEHICLE SPEED SENSOR (VSS)

Inspection
Check vehicle speed sensor referring to step 3 of DTC P0500 Flow
Table. If malfunction is found, replace.
Removal/Installation
Refer to Section 7A.

FUEL LEVEL SENSOR (GAUGE)

Inspection
Refer to Section 8.
Removal/Installation
Refer to Section 6C.
MAIN RELAY, FUEL PUMP RELAY AND RADIATOR
FAN CONTROL RELAY
Inspection
1) Disconnect negative cable at battery.
2) Remove main relay (1), fuel pump relay (2) and radiator fan con-
trol relay (3) from relay box.
3) Check that there is no continuity between terminal "c" and "d".
If there is continuity, replace relay.
4) Connect battery positive (+) terminal to terminal "b" of relay.
Connect battery negative (–) terminal "a" of relay.
Check continuity between terminal "c" and "d".
If there is no continuity when relay is connected to the battery,
replace relay.