Cooling Water Pipes Or Hoses Removal/Installation; Thermostat Removal - Suzuki Swift User Manual

ON-VEHICLE SERVICE
WARNING:
D Check to make sure that engine coolant temperature is
cold before removing any part of cooling system.
D Also be sure to disconnect negative cord from battery ter-
minal before removing any part.
COOLING WATER PIPES OR HOSES
REMOVAL
1) Drain cooling system.
2) To remove these pipes or hoses, loosen screw on each pipe or
hose clip and pull hose end off.
1. Radiator hose
2. Clamp
INSTALLATION
Install removed parts in reverse order of removal procedure, noting
the following.
D Tighten each clamp bolt securely.
D Refill cooling system with proper coolant, referring to description
on COOLANT of MAINTENANCE.
THERMOSTAT
REMOVAL
1) Disconnect negative cable at battery.
2) Drain cooling system and tighten drain plug.
3) Disconnect thermostat cap (1) from thermostat case (2).
ENGINE COOLING 6B-7