TABLE B-5 POWER STEERING PRESSURE (PSP) SWITCH SIGNAL CIRCUIT
CHECK (IF EQUIPPED)
Power steering
pressure
switch
INSPECTION
STEP
1
Check PSP Switch Signal Circuit.
1) Connect SUZUKI scan tool to DLC with ignition
switch OFF.
2) Start engine and select "DATA LIST" mode on
scan tool.
3) Check PSP switch signal under following each
condition. See Fig. 1.
Engine running and steering
wheel at straight-ahead position
Engine running and steering wheel
turned to the right on left as far as it stops : ON
Is check result satisfactory?
Fig. 1 for Step 1
ENGINE GENERAL INFORMATION AND DIAGNOSIS (TBI FOR G10) 6-103
ACTION
YES
PSP switch signal
circuit is in good
condition.
: OFF
NO
"Bl/W" circuit open or
short, PSP switch
malfunction or power
steering system
malfunction.