Suzuki Swift User Manual page 464

6E2-36 ENGINE AND EMISSION CONTROL SYSTEM (SFI FOR G13)
1
Inspection
1) Check resistance between following terminals of EGR valve in
each pair.
1. EGR valve
2. Connector
If found faulty, replace EGR valve assy.
2) Remove carbon from EGR valve gas passage.
2
NOTE:
Do not use any sharp–edged tool to remove carbon.
Be careful not to damage or bend EGR valve, valve seat and
rod.
3
3) Inspect valve, valve seat and rod for fault, cracks, bend or other
1. EGR valve
damage.
2. Valve
If found faulty, replace EGR valve assembly.
3. Valve seat
Installation
Reverse removal procedure noting following.
D Clean mating surface of valve and intake manifold.
D Use new gasket.
EVAPORATIVE EMISSION CONTROL SYSTEM
EVAP Canister Purge Inspection
NOTE:
Before inspection, check to make sure that gear shift lever is
in neutral position (with A/T model, selector lever in "P" range)
and that parking brake lever is pulled all the way up.
Terminal
A – B
C – B
F – E
D – E
Standard resistance
20 – 24 Ω