Dtc P0335 Crankshaft Position Sensor Circuit Malfunction - Suzuki GRAND VITARA XL-7 Owner's Manual

Hide thumbs Also See for GRAND VITARA XL-7:

Table of Contents

6-1-84 ENGINE GENERAL INFORMATION AND DIAGNOSIS (H27 ENGINE)

DTC P0335 Crankshaft Position Sensor Circuit Malfunction

WIRING DIAGRAM

1. CKP sensor

2. ECM (PCM)

DTC DETECTING CONDITION AND TROUBLE AREA

DTC DETECTING CONDITION

CKP sensor signal is not input while 100 pulses of

CMP sensor signal are input after engine start.

DTC CONFIRMATION PROCEDURE

Check to make sure that following condition is satisfied when using this "DTC CONFIRMATION PRO-

• Intake air temp. : – 8°C (18°F) or higher

• Engine coolant temp. : – 8 – 110°C (18 – 230°F)

• Altitude (barometric pressure) : 2400 m, 8000 ft or less (560 mmHg (75 kPa) or more)

1) Connect scan tool to DLC with ignition switch OFF.

2) Turn ON ignition switch and clear DTC, pending DTC and freeze frame data by using scan tool and run

engine at idle speed for 10 sec.

3) Check DTC by using scan tool.

TROUBLE AREA

CKP sensor circuit

Table of Contents