4.2
Battery pack
Removing the Battery pack
T
o remove the battery pack, follow the steps below and refer to Figure 4-1.
CAUTION:
Take care not
Similarly, do not drop, knock, scratch, disassemble, twist, or bend the
battery pack.
1. Turn off the power of the computer.
2. Disconnect the AC adapter and other external devices from the computer.
3. Turn the computer face down.
4. Release the battery lock and remove the battery pack while sliding the battery
release latch as shown in th
Battery pack
Battery lock
NOTE: Dispose of the used battery pack in accordance with the laws and ordinances of
your local authority.
TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784) [CONFIDENTIAL] 4-11
to short circuit the terminals when removing the battery pack.
e figure below.
Battery release latch
Figure 4-1 Removing the battery pack