Hdd - Toshiba TECRA A11 Series Maintenance Manual

4.7

HDD

Removing the HDD
To remove the HDD, follow the steps below and refer to Figure 4-11 and 4-12.
CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause the
data loss or damage to the device.
1. Remove the following screw securing the HDD cover.

M2.55B
2. Insert your finger into the slot and lift the HDD cover to remove.
3. Remove the HDD assembly from the slot and disconnect it from the connector on the
system board.
M2.55B FLAT HEAD
TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784) [CONFIDENTIAL] 4-23
FLAT HEAD screw
Guide
Slot
Figure 4-11 Removing the HDD assembly
1
Guide
HDD cover
HDD assembly