Toshiba TECRA A11 Series Maintenance Manual page 332

4. Turn over the computer and open the display.
5. Turn up the insulator (LCD CONN INSULATOR) and disconnect the LCD harness
from the connector CN5300 on the system board.
6. Disconnect the FS board FFC and
CN9540 on the system board.
7. Remove the following screws.

M2.58B

M2.512B
M2.5x8B FLAT HEAD
M2.5x12B FLAT HEAD
LCD harness
(Connected t o CN5300)
Figure 4-24 Removing the cover assembly and base assembly (2)
4-42 [CONFIDENTIAL] TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784)
camera harness from the connector CN9550 and
FLAT HEAD screw
FLAT HE AD screw
M2.5x12B FLAT HEAD
Insulator
(LCD CONN INSULATOR)
5
3
Camera harness
(Connected to CN9540)
M2.5x8B FLAT HEAD
FS board FFC
(Connected to CN95 50)