Toshiba TECRA A11 Series Maintenance Manual page 374

6. Disconnect the RJ11 harness from the connector CN3010 on the system board.
7. Take out the RJ11 harness from the RJ11 harness holder.
8. Remove the following screw securing the RJ11 h arness holder.
 1
M2.04B BIND screw
9. Release the latches and remove the RJ11 harness holder.
RJ11 harness
M2.0x4B BIND
RJ11 harness holder
Latch
Latch
CN3010
Figure 4-45 Removing the RJ11 harness
4-84 [CONFIDENTIAL] TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784)