Overview - Toshiba TECRA A11 Series Maintenance Manual

4 Replacement Procedures
4.1

Overview

This chapter describes the procedure for removing and replacing the field replaceable u
(FRUs) in the PC. It may not be necessary to remove all the FRUs in order to replace on
The chart below provides
particular FRU can be removed. The numbers in the chart indicate the relevant section
numbers in this manual.
In all cases when removing an FRU
an FRU that is the potential cause of a computer fault, use the chart to determine the order in
which FRUs need to be removed.
Chart Notation
The chart shows th e case
for the following exam ple:
 Removing the
Bluetooth module
All FRUs down to the "4.2
Battery pack" to "4.13
Cover assembly/Base
assembly" above the 4.15
Bluetooth module must be
removed.
TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784) [CONFIDENTIAL]
a guide as to which other FRUs must be removed before a
, the battery pack must also be removed. When repairing
nits
e.
4-1