Toshiba TECRA A11 Series Maintenance Manual page 375

Installing the MDC/SIM board
To install the MDC/SIM board, follow the steps below and refer to Figure 4-44 and 4-45.
1. Set the RJ11 harness holder to the system board while engaging the latches.
2. Secure the RJ11 harness holder with the following screw.

M2.04B
3. Set the RJ11 harness into the RJ11 harness holder and connect the RJ11 harness to
the connector CN3010 on the system board.
4. Connect the RJ11 harness to the connector on the MDC.
5. Set the MDC on the system board.
6. Set the SIM board on the MDC and secure them with the following screws.

M2.06B

M2.04B
7. Connect the SIM board FFC to the connector CN9570 on the system board and
CN9670 on the SIM board.
TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784) [CONFIDENTIAL] 4-85
BIND screw
BIND screw
or
BIND screw
1
2 (with SIM board)
2 (without SIM board)