Toshiba TECRA A11 Series Maintenance Manual page 345

Installing the Smart card slot
To install the smart card slot, follow the steps below and refer to Figure 4-30 and 4-31.
1. Slide the smart card holder into the slot until the hook is engaged.
2. Secure the smart card holder with the following screw.

M2.55C
3. Slide the smart card slot under the guides until the hook is engaged.
4. Arrange the smart card FPC under the guide.
5. Connect the smart card FPC to the connector CN9530 on the system board.
TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784) [CONFIDENTIAL] 4-55
Tapping screw
1