4.18 Microphone harness
Removing the Microphone harness
To remove the microphone harness, follow the steps below and refer to Figure 4-33.
1. Turn up the insulator (INSU SP HNS) and disconnect the microphone harness
the connector CN6070 on the system board.
2. Remove the microphone harness from the slot of the base assembly.
Microphone harness
Installing the Microphone harness
To install the microphone harness, follow the steps below and refer to Figure 4-33.
1. Turn up the insulator (INSU SP HNS) and connect the microphone harness
connector CN6070 on the system board.
2. Set the microphone harness into the slot of the base assembly.
4-58 [CONFIDENTIAL] TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784)
Insulator (INSU SP HNS)
Figure 4-33 Removing the microphone harness
CN6070
from
to the