Usb/Sound Board - Toshiba TECRA A11 Series Maintenance Manual

4.17 USB/Sound board

Removing the USB/Sound board
To remove the USB/sound board, follow the steps below and refer to Figure 4-32.
1. Disconnect the USB/sound harness from the connector CN9530 on the system board
and connector CN9630 on the USB/sound board.
2. Remove the USB/sound board from the slot of the base assembly in the direction as
shown in the figure below.
Pull tab (blue)
4-56 [CONFIDENTIAL] TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784)
USB/sound harness
CN9530
Figure 4-32 Removing the USB/sound board
Pull tab (black)
USB/sound board
CN9630