Card - Toshiba TECRA A11 Series Maintenance Manual

4.12 3G card
Removing the 3G card
To remove the 3G card, follow the steps below and refer to Figure 4-22.
1. Disconnect the 3G antenna cables from the connectors on the 3G card using an
antenna coaxial cable disconnector.
2. Remove the following screws securing the 3G card.

M2.03C
3. Disconnect the 3G car
TECRA A11/S11/P11 Satellite Pro S500 Series Maintenance Manual (960-784) [CONFIDENTIAL] 4-39
BIND screw
d from the connector on
3G antenna cable (blue)
M2.0x3C BIND
Figure 4-22 Removing the 3G card
2
the system board.
3G card
3G antenna cable (red)