Making Intercom Call; Putting/Picking Up Call On Hold; Transferring Call To Extension Call Park; Call Park/Transfer To Park - Iwatsu ADIX APS Quick Reference Manual

Digital telephone station
Hide thumbs Also See for ADIX APS:
Table of Contents

Advertisement

Making an Intercom Call
Lift the receiver and wait for dial tone
Dial an extension number
or
If
your
phone
has
SELECTION] button assigned for the extension
Lift the receiver and wait for dial tone
Press the assigned extension button
Receiving a Call From Another Extension
When you hear the intercom call signal - either the
caller's voice or intercom ringing tone
Pick up the receiver, and the call is connected
or
Speak into the microphone without lifting the
receiver
Making an Intercom Group Call
Dial the Intercom Group access number when you
hear the Intercom Dial Tone.
Putting a Call On Hold
When speaking on an outside line
Press the [HOLD/DND] button
The active outside line button lamp flashes green
on your phone and red at other extensions.
If the call is not picked up, the call will ring again at
your phone.
Picking Up a Call On Hold
Press the key with either the green or the red
flashing lamp to pick up the call being held on that
line
Transferring a Call to Another Extension
When speaking on an outside line
Press the [TRAN] button. You will hear a dial tone
Dial an extension number
or
Press an extension button (if assigned)
Announce the call when the extension answers
Hang up
911 Support
At default, ADIX APS is programmed to automatically
contact your local Public Safety Answering Point
(PSAP) when 911 is dialed. In addition, ADIX APS is
one of the only systems that supports Enhanced 911
Service. Enhanced 911 Service ensures that when 911
is dialed from a system extension, information that
allows the PSAP to identify the caller's location in a
building is sent to the PSAP along with the call. Check
with your system installer or Authorized Iwatsu
Distributor to make sure your system is programmed
for Enhanced 911 Service.
a
[DIRECT STATION
3
Call Park
Park a call so that it can be reached from another
extension.
Putting a call in Call Park
When speaking on an outside line
Press the [PARK] button
You will hear confirmation tone and the [PARK]
button will flash green
If the call is not picked up, it will return to your
phone.
Picking up a call in Call Park
From the extension that parked the call
Lift receiver
Press flashing [PARK] button
From another extension
Lift receiver
Press [PARK PICK-UP]
Dial extension number where the call is parked
to pick-up the call
Transfer to Park
You can transfer a call to another user's individual
park on their telephone. The call can then be
picked up remotely from another telephone. The
call can also be picked up from the telephone
where it is parked.
Transferring a call to another user's individual park
When speaking on an outside line
Press [TRAN] + [PARK]
Dial the number of the extension where the call is
to be parked, or press the extension button (if
assigned)
When you hear confirmation tone, hang up
The [PARK] key on the user's phone will be lit
If desired, use the paging system to inform the user
of the call parked on their telephone
Picking up a call parked on your individual park
from your telephone
Lift the receiver (handset)
Press [PARK]
Picking up a call parked on your individual park
from another telephone
Lift the receiver (handset)
Press [PARK]
Dial the number of the extension where the call is
parked, or press the extension button (if assigned)
or
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ix-12ktd-2Ix-12ktd-3Ix-12kts-3Omega-phone adix aps

Table of Contents