Keypad Functions - ADEMCO Lynx Installation Instructions Manual

Keypad Functions

Empty boxes represent the user's security code.
Security Functions
Checking system status:
To arm in STAY mode:
To restart exit delay:
To arm in AWAY mode:
To arm with NO DELAY:
To arm if Quick Arm is programmed:
To disarm the system and silence alarms:
To bypass a zone(s):
To turn Chime mode on or off:
Message Center
To record a message:
To stop recording before end of 20 seconds:
To play back a message:
To adjust message playback volume:
To mute system announcements:
To restore announcement sounding:
To set the time and date:
Other Functions
To activate or deactivate devices 1-6:
To activate or deactivate devices 7 & 8:
To add a user code:
To delete a user code (except Master Code):
To turn Test mode on:
To turn Test mode off:
To use the defined AUX function: Press and hold
To send message to pager: Press and hold
Note that if you enabled Quick Arm (field
least 2 seconds instead of entering the security code, for any of the arming procedures (AWAY, STAY). The
security code is always required, however, when disarming the system.
The keypad allows the user to arm and disarm the system, and perform other system functions, such as bypassing
zones. Zone and system conditions (alarm, trouble, bypass) are displayed in the display window.
When an alarm occurs, keypad sounding and external sounding will occur, and the zone(s) in alarm will be displayed
on the keypad. Pressing any key will silence the keypad sounder for 10 seconds. Disarming the system will silence
both keypad and external sounders. When the system is disarmed, any zones that were in an alarm condition during
the armed period will be displayed (memory of alarm). To clear this display, simply repeat the disarm sequence
(enter the security code and press the OFF key).
The keypad also features chime annunciation, and 3 panic key pairs for silent, audible, fire or personal emergency
alarms. These keys can notify the central station of an alarm condition, if that service is connected.
For detailed information concerning system functions, refer to the User's Manual.
--
STATUS
+
-
STAY
(applies only if system is armed in Stay mode)
------
STAY
+
AWAY
+
or
AWAY
+
-------
BYPASS
+
FUNCTION
+
------
FUNCTION RECORD
+
-
FUNCTION PLAY
FUNCTION
+
FUNCTION
FUNCTION
+
-
FUNCTION
+
-------
CODE
+
----
TEST
+
----
OFF
AUX
21), the dedicated arming keys can be pressed and held down for at
*
–33–
or +
AWAY STAY NO DELAY
(hold down for at least 2 seconds)
STAY
+
OFF
+ 2-digt zone number(s)
CHIME
OFF
+ + [3] or [6]
VOLUME
+
VOLUME OFF
+ + [3] or [6]
VOLUME
+ [63]
FUNCTION
+ or
LIGHTS ON LIGHTS OFF
+ +
# LIGHTS ON
+ user number + user's code
+
CODE
key 2 secs (4 beeps) +
AUX
key 2 seconds (4 beeps)
+ device number
or + dev. no.
LIGHTS OFF
+ user number