Specifications - ADEMCO Lynx Installation Instructions Manual

LYNX 1. Physical:
SECURITY
CONTROL
2. Electrical:
VOLTAGE INPUT: 9VAC from plug-in 15VA transformer,
BACKUP BATTERY: one 9-volt alkaline battery (recommended: Duracell's PC1604
ProCell) or 6 1.5V "AA" alkaline batteries (e.g., Duracell MN1500)
ALARM SOUNDER: Piezo = 6-14VDC, 30mA max/ Bell = 6-14VDC, 120mA max
(e.g., ADEMCO's WAVE2EX)
3. Communication:
FORMATS SUPPORTED:
ADEMCO Express,
10 characters/sec, DTMF (TouchTone) Data Tones, 1400/2300Hz ACK, 1400Hz
KISSOFF.
ADEMCO Contact ID Reporting,
10 characters/sec., DTMF (TouchTone) Data Tones, 1400/2300Hz ACK, 1400Hz
KISSOFF.
ADEMCO Low Speed, 10 pulses/sec, 1900Hz Data Tone,
1400Hz ACK/KISSOFF.
Radionics/SESCOA, 20 pulses/sec, 1800Hz Data Tone, 2300Hz ACK/KISSOFF.
Can report 0–9, B–F.
Line Seize: Double Pole
Ringer Equivalence: TBD
FCC Registration No.: TBD
4. Maximum Zone 1 Resistance: 300 ohms, excluding 2k ohm EOLR
10-3/8" W x 7-1/8" H x 1-3/4" D
–41–

Specifications