Hp-Ib Device Address - HP 7936 Support Manual

3-16. HP-IB DEVICE ADDRESS
The Channel Address switches located on the rear
panel of the drive are used to set the HP-IB device
address. See figure 3-l. The switches permit set-
ting one of eight unique addresses. The switches
can be set with any pointed tool. When setting the
HP-IB address, disregard any markings on the
switch body. Set the switches according to the in-
Installation And Configuration
7936 and 7937
forma tion on the Channel Address/Diagnostic
switch label. See figure 3-2.
NOTE
Before using the drive, check the address
switches to ensure that no two devices
in the system have the same address.
3-5