Multiple Handset Use; Intercom; Answer An Incoming Call During An Intercom Call - AT&T BL102-4S Complete User's Manual

Multiple handset use

Intercom

Use the intercom feature for conversations between two handsets. This
feature is only available if you have at least two system handsets. You can
buy accessory handsets (AT&T model BL102-0S) to expand your system.
Use a handset to initiate intercom calls.
1. Press MENU/
enter the main menu. Press qCID or pDIR to scroll to
Intercom, then press
2. If you have two system handsets, the handset shows
Calling HS X (X represents the handset number). The
destination device rings and shows HS X is calling.
-OR-
If you have more than two system handsets, press
or pDIR to select a device, or use the dialing keys to
enter a device number (1-5). The handset shows Calling
HS X. The destination handset rings and shows HS X is
calling.
To answer an intercom call:
PHONE/
Press
f
key (0-9, TONE , or # ) on the called handset. Both handsets now show
Intercom.
To end an intercom call:
/CANCEL or places the handset back in the telephone base or
3. Press
OFF
charger.
NOTES:
Before the intercom call is answered, you can cancel it by pressing
f
If the called party does not answer within 100 seconds or if the handset is in use, on a call or out of range, the
f
calling handset shows No answer. Try again..
OFF/
Pressing
CANCEL
f
You can only use one pair of handsets to make intercom calls at a time.
f

Answer an incoming call during an intercom call

If you receive an incoming outside call during an intercom call, there is a
two-beep call waiting tone.
• To answer the call, press PHONE/
automatically. The party on the intercom call hears four beeps. Other system
handsets can also answer the incoming call by pressing PHONE/
on the handset in idle mode to
SELECT
/SELECT.
MENU
/SPEAKER or any dialing
,
FLASH
or MUTE/
temporarily silences the intercom ringer.
DELETE
/CANCEL.
OFF
. The intercom call ends
FLASH
29
Calling HS X
ECO
HS X is calling
ECO
qCID
Intercom
ECO
FLASH
.