Registering A Recipient; Programming A One-Touch Dial Button - Konica Minolta bizhub 200 User Manual

5
5.7

Registering a recipient

Programming a one-touch dial button

If a recipient is registered with a one-touch dial button, the transmission can
be sent easily and accurately.
Two types of recipients can be registered with a one-touch dial button: a
main recipient and secondary recipients, where the data is sent if the trans-
mission to the main recipient fails.
Note
If the "Restrict One-Touch Editing" parameter on the Administrator Set
screen (displayed from the Administrator Management screen) is set to
"ON", only the administrator will be able to register, change and delete
one-touch recipients. For details on the Administrator Set screen, refer to
the User's Guide [Facsimile Operations].
!
Detail
Any of the following communication modes can be specified for the sec-
ondary recipient.
- PC (E-mail)
- PC (Scanner)
- InternetFAX (Internet FAX)
- InternetFAX (IP-TX)
- InternetFAX (IP Relay)
- FAX (G3)*
* The communication mode can be specified if the optional fax kit is in-
stalled.
Settings can be specified for the following.
Item
One-Touch Name
Destination
IP Relay Station Setting
5-30
Description
Type in the name of the recipient that will appear on the
one-touch dial button. Up to 12 characters can be entered.
Example: Tokyo br
Type in the fax number for the recipient. The entered
number can be up to 64 digits long.
Select the relay station.
IP Relay operations
200/250/350