Table of Contents
Advertisement
6.2
Setting Up the Playback Function
Note that the Playback function will not be active until the user has inserted a micro SD card in the
camera's micro SD card slot. The card slot is on the Rear Module. The card may also have to be formatted
in the Secure Digital Card field (see 7.1.3 Storage).
To insert the Micro SD card into the card slot on the Rear Module,
the Stopper,
and then rotate to remove the Base Cover.
Screw Cap
6.2.1 Inserting / Removing the Micro SD Card
1.
To insert the SD card: Remove the camera cover and insert the SD card into the SD card slot before
powering on the camera.
2.
To remove the SD card: Click the Remove button (System Settings > Storage > Secure Digital Card)
when the camera is powered on, the SD card information "SD card is not mounted" will display
and the Remove button will change to Attach, and then you may remove the SD card. If you want
to insert the SD card again, insert the SD card and then click the Attach button.
After inserting the SD card into the SD card slot, the Playback button on the Live View page should be
activated. If not, do the following:
1.
Click the Remove button, pull the card out and re-insert it.
2.
Click the Format button to format the card. NOTE: All data on the disk will be deleted if the Format
button is clicked.
Micro SD Card Slot
Stopper
22
EZN1160/1260/1360
unscrew the Screw Cap first, pull out
Base Cover
Advertisement
Table of Contents
