Table of Contents
Advertisement
7.1.8 Black/White List
Use this page to specify IP addresses that are allowed / denied to access this camera. By default, any
IP address can access the camera.
Note: The Allowed IP addresses only become relevant when the Denied items contain a
Network or Range, and the supervisor wants to allow one or more IP addresses within that
excluded range or network. In such a scenario, the user would enter the excluded range or
network for the Denied items, and enter the exceptions for the Allowed items.
IP Type: Select IPv4 or IPv6 from the drop-down list.
Permission Type: Select Deny to deny the IP addresses configured below from accessing the
camera. The Allow option is only relevant if you've set up at least one Deny item configured with
Network or Range network rule from the Rule drop-down list.
Rule: Select a network rule and then fill in the IP information in the below boxes.
Single: Type a single IP address in the IP Address field below.
•
Network: Type the IP address and subnet mask in the field below.
•
Range: Type a range for the IP addresses.
•
: Set up the IP information and click the Create button, the created IP information will be
listed in the Black/White list.
: Highlight an item in the list and then click the Remove button to remove the highlighted
item.
: Highlight an item in the list and set up the IP information in the boxes below the
Black/White list. Click the Edit button and the item will be edited.
: Click the button to cancel the changes and return to the previous settings.
43
EZN1160/1260/1360
Advertisement
Table of Contents
