Physical Description; Cables And Terminal Block - EverFocus True Day/Night, WDR, IP66 User Manual

3. Physical Description

1
2
3
Front Module
No. Item Name
1 Light Sensor
2 IR LEDs
3 Lens
4 Video Test Output
5 Reset Button
6 Micro SD / SDHC Slot
7 Spare Terminal Block
8 Front Cover
9 Sunshield
10 Base Cover
3.1

Cables and Terminal Block

The cables provide connections for Network, power and alarm input / output. The wires are illustrated
and defined below.
Spare Terminal Block on the Rear Module
To open the Rear Module, please refer to Step 1 to 3 in 4.3 Inserting a Micro SD Card.
4
5
Rear Module
6
Descriptions
Detects lights.
8 IR LEDs for infrared illumination in night vision applications.
Fixed lens.
Connects to a handheld test monitor for adjusting camera view.
Resets all configurations to the factory default settings.
Insert a micro SD / SDHC card. See 4.3 Inserting a Micro SD Card.
For connecting to power or alarm I/O. See 3.1 Cables and Terminal Block.
Remove the cover for connecting to a handheld test monitor.
Protect the camera from the direct rays of the sun.
Remove the cover for inserting a micro SD card.
LAN / PoE Cable
12 VDC / 24 VAC
Alarm Input / Output
Power
Alarm Out
Alarm In
6 5 4 3 2 1
7
8
Pin Assignment for Alarm I/O
Alarm Out
Alarm In
4 3 2 1
Pin 1: 12 VDC+ / 24 VAC+
Pin 2: 12 VDC- / 24 VAC-
Pin3: Alarm COM (-)
Pin4: Alarm Out (+)
Pin5: Alarm In (+)
Pin6: Ground (-)
3
EZN1160/1260/1360
9 10
Pin 1: Alarm COM (-)
Pin 2: Alarm Out (+)
Pin 3: Alarm In (+)
Pin 4: Ground (-)