Table of Contents
Advertisement
4.3
Inserting a Micro SD Card
You can optionally insert a micro SD card into the card slot for recording videos.
1.
Loosen the screw to remove the Sunshield from the camera.
2.
For Cable Management model, unscrew the three screws to remove the Bracket.
3.
Unscrew the Screw Cap first, pull out the Stopper,
4.
Insert a micro SD card into the card slot.
Micro SD Card Slot
Note:
1. Please close the Base Cover immediately in case of reducing the absorption capacity of the
desiccant bag inside the camera.
2. To optionally replace a new desiccant bag, remove the used desiccant bag from the camera
and then put the supplied Desiccant Bag in the middle layer. (Unplug the network cable if
necessary)
5.
Firmly close the Base Cover and Screw Cap, and then screw the Sunshield.
Screw Cap
and then rotate to remove the Base Cover.
Stopper
10
EZN1160/1260/1360
Base Cover
Advertisement
Table of Contents
