EverFocus True Day/Night, WDR, IP66 User Manual page 15

6. Screw the camera to the Stand using either one of the four holes (two on the top; two on the
bottom) on the camera.
7. Connect the network, power and other cables of the camera to the related devices. Please refer to
3.1 Cables and Terminal Block.
8. Access the camera live view. Please see 5. Accessing the User Interface. Or connect a handheld test
monitor to the Video Test Output on the camera module for adjusting camera angles (see image
below).
360°
90°
360°
9
EZN1160/1260/1360