4.
Connect the network, power and other cables to the related devices. Please refer to 3.1 Cables and
Terminal Block.
5.
Optionally insert a micro SD / SDHC card into the card slot (see 4.3 Inserting a Micro SD Card).
Note: Please close the Base Cover immediately in case of reducing the absorption capacity of
the desiccant bag inside the camera.
6.
Access the camera live view. Please see 5. Accessing the User Interface. Or connect a handheld test
monitor to the Video Test Output on the camera module for adjusting camera angles.
7.
Adjust the camera angles.
Pan Adjustment: Unscrew the Set Screw using the supplied Hexagon Wrench. Twist the Camera
Base forcefully until it unscrews from the E-Z Lock Ring. Rotate the camera by 360° to the desired
position and screw the E-Z Lock Ring until it locks against the Camera Base. Screw back the Set
Screw.
Tilt Adjustment: Loosen the Screw using the provided Hexagon Key and adjust the tilt angle by 87°.
Rotational Adjustment: Loosen the Screw using the providing Hexagon Key and rotate the camera
by 360°.
Set Screw
E-Z Lock Ring
Camera Base
360°
87°
360°
7
EZN1160/1260/1360