Advertisement
Quick Links
Value IP Series Network Camera
EZN1250-S & EZN1240-S, H265, IR, WDR
Quick Installation Guide
EZN1250-S
EZN1240-S
Copyright © EverFocus Electronics Corp.
Release Date: March, 2020
All the images including product pictures or screen shots in this document are for example only.
The images may vary depending on the product and software version. Information contained in
this document is subject to change without notice.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan
TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw
Advertisement
Related Manuals for EverFocus EZN1250-S
Summary of Contents for EverFocus EZN1250-S
- Page 1 The images may vary depending on the product and software version. Information contained in this document is subject to change without notice. EverFocus Taiwan: 2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw...
- Page 2 1. Physical Description EZN1240-S EZN1250-S No. Item Name Descriptions Loosen the Rotate Screws (on both side) to adjust Rotate Screw the rotating angle. Tilt Screw Loosen the Tilt Screw to adjust the tilting angle. Pan Screw Loosen the Pan Screw to adjust the angle.
- Page 3 Dimensions EZN1240-S 75.47mm / 2.97" 148.45mm / 5.8" EZN1250-S Ø 83.58mm / 3.29" 241.18mm / 9.5" Packing List Please check that there is no missing items in the package before installing. EZN Series 1. Camera x 1 2. MAC Address Sticker x 2 3.
- Page 4 2. Contact the shipper if any items appear to have been damaged in the shipping process. Optional Accessory You can go to the product page on EverFocus’ website to check the related optional accessories. www.everfocus.com.tw 2. Cables The cables provide connections for network, power, audio input / output and alarm input / output.
-
Page 5: Installation
Alarm IO PIN Assignment Note that this function just for EZN1250-S. Alarm In Alarm Out Reset Button Note that this function just for EZN1250-S. The Reset Button can be used to restore the camera to factory default. When the camera is powered up, press the Reset Button about 8 seconds to reboot the camera. - Page 6 Rotate Screws (both sides) Tilt Screw Pan Screw 3. Connect the camera to power. You can either connect the camera to a 12VDC power source or to a PoE switch using the PoE cable. 4. Connect the camera to the network using the supplied Cable Gland Kit. a.
- Page 7 Please input a password for the first-time login. 5. Important Note for Motorized Lens Models Note that this function just for EZN1250-S. For motorized lens models, if you find the live image out of focus, please try the instructions below: 1.