For the Standard Model:
1. Before screwing the supplied Stand to the wall / ceiling, drill three holes on the wall / ceiling
according to the hole-positions on the Base of the Stand.
2. Insert the supplied three Anchors into the holes on wall / ceiling.
3. Install the supplied Stand.
4. Screw the supplied Stand to the wall / ceiling using the supplied screws.
5. Optionally insert a micro SD / SDHC card into the card slot. Please refer to 4.3 Inserting a Micro SD
Card.
Note: Please close the Base Cover immediately in case of reducing the absorption capacity of
the desiccant bag inside the camera.
8
EZN1160/1260/1360