Setting Up Port Forwarding Function - EverFocus EDN288MS User Manual

Stainless Steel 2MP/3MP/4MP Network Cameras
D. Setting up Port Forwarding Function
IP Camera port forwarding can be used when users need to access a certain IP camera from outside of the
local network where the IP camera is connected to.
To enable the IP camera port forwarding function, you have to configure the port forwarding settings both
on the IP camera and the router (UPnP-enabled). Please follow the steps below:
Internet Local Network
IP Camera
PC
Router Switch
Notebook
1. Go to System > System Settings > Network > IP Settings.
a. Set up a static IP for the IP camera. Type in the subnet mask, gateway and the DNS if provided
by the Internet Service Provider.
71