EverFocus True Day/Night, WDR, IP66 User Manual page 25

13. Manual Control
Click the
configured an event (in the Event List) that will trigger a reaction (like a recording) when a Manual
Trigger event occurs, clicking this button will trigger that reaction. You can select what that reaction
will be. You can, for instance, set the camera to record the video feed to the SD card on board the
camera. You can then click on the Playback button to open the Playback page and search for and play
all such recordings that had been stored on the card. Such event actions will be effective once they
have been configured in the Event List (see 7.3.2 Event).
Click the
14. Status Display (info line that can be placed above video box or at bottom of page)
This shows the name of the camera that is currently active or being configured, current date/time
and current frame rate. You can activate these info displays in the Overlay Text Settings (see 7.1.4
Display and Overlay).
15. Event signal icons (above video screen)
When an alarm or motion event is triggered, a signal icon will appear at the top right of the Live View
window to alert the user.
Alarm event icon
Motion detection icons
colors of the motion trigger areas you have configured in the Motion Settings (see 7.3.2 Event).
Recording icon
button to trigger an event directly from the Live View window. If you have
button to reset the alarm output remotely.
: When an alarm is triggered, this icon appears.
: When the camera is recording to a PC-based folder, this icon appears.
: The colors of these motion event icons correspond to the
19
EZN1160/1260/1360