EverFocus True Day/Night, WDR, IP66 User Manual page 45

【Video Configuration】
Save: To make a backup file of the machine's video configurations, click this button to save the

video configurations to a configuration file. This will enable the user to reload these configuration
settings if the settings are changed and there is unexpected behavior.
Upload: This function can only be set up in the Advanced tab. To load a previously saved video

configuration, click the Browse button to locate the saved configuration file (see above) and then
click the Upload button. The system's settings will be restored to the saved video configuration.
【Video Format】Select NTSC or PAL for your local scanning system. Click Apply to save the setting.
【Upgrade Firmware】This function can only be set up in the Advanced tab. Click the Browse button to
find a previously prepared firmware upgrade file. Click the Upload button to install the new firmware.
Note:
1. Do not disconnect power to the unit during the upgrade sequence. The unit will reboot
automatically after the upgrade has completed (1-5 minutes).
2. During the upgrade process, all event recording actions will be stopped. Event recording
actions will resume after the camera is rebooted.
3. If the "File Error, Please re-login!!" warning message appears when upgrading the firmware,
please try the following instructions:
a. Go to Internet Explorer > Tools > Internet Option > Security > Custom.
b. Find and enable the Include local directory path when uploading files to a server.
39
EZN1160/1260/1360