EverFocus True Day/Night Indoor Vandal Color Camera ED550 Operation Instructions Manual
  1. Manuals
  2. Brands
  3. EverFocus Manuals
  4. Security Camera
  5. ED550
  6. Operation instructions manual

EverFocus True Day/Night Indoor Vandal Color Camera ED550 Operation Instructions Manual

560 tvl true day/night indoor vandal color camera
Hide thumbs Also See for True Day/Night Indoor Vandal Color Camera ED550:
Table of Contents

Advertisement

Quick Links

Please read this manual first for correct installation and operation. This manual should be retained for future
reference. The information in this manual was current when published. The manufacturer reserves the right to
revise and improve its products. All specifications are therefore subject to change without notice.
PRECAUTIONS
1.
Do not install the camera near electric or magnetic fields.
Install the camera away from TV, radio transmitter, magnet, electric motor, transformer, audio speakers
since the magnetic fields generate from above devices will distort the video image.
2.
Never disassemble the camera nor put impurities in it.
Disassembly or impurities may result in trouble or fire.
3.
Never face the camera toward the sun.
Direct sunlight or severe ray may cause fatal damage to sensor and internal circuit.
4.
Keep the power cord away from wet and never touch the power cord with wet hands.
Touching the wet power cord with hands or touching the power cord with wet hands may result in electric
shock.
5.
Never install the camera in areas exposed to water, oil or gas.
Water, oil or gas may result in failure, electric shock or file.
6.
Cleaning
Do not touch the surface of sensor by hand directly. Use a soft cloth to remove the dirt from the camera
body. Use lens tissue or a cotton tipped applicator and ethanol to clean the sensor and the camera lens.
7.
Do not operate the camera beyond the specified temperature, humidity or power source ratings.
Use the camera at temperatures within 0℃ ~ 40℃ (32℉ ~ 104℉) and 20%~80% Humidity. The input
power source is 12VDC/24VAC.
EVERFOCUS
560 TVL True Day/Night Indoor
Vandal Color Camera

Operation Instructions

Model No.
ED550

Advertisement

Table of Contents
loading

Related Manuals for EverFocus True Day/Night Indoor Vandal Color Camera ED550

Summary of Contents for EverFocus True Day/Night Indoor Vandal Color Camera ED550

  • Page 1: Operation Instructions

    Do not operate the camera beyond the specified temperature, humidity or power source ratings. Use the camera at temperatures within 0℃ ~ 40℃ (32℉ ~ 104℉) and 20%~80% Humidity. The input power source is 12VDC/24VAC. EVERFOCUS 560 TVL True Day/Night Indoor Vandal Color Camera Operation Instructions Model No.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS 1. PRODUCT OVERVIEW ... 4 1.1 Main Features ... 4 1.2 Package Contents ... 4 1.3 Specifications ... 5 1.4 Dimensions ... 6 2. NAMES AND FUNCTIONS OF PARTS ... 6 2.1 Front Panel ... 6 2.2 Back Panel ... 8 3.
  • Page 3 5.8.7 SHARPNESS ... 24 5.8.8 RESET ... 24 5.8.9 RETURN ... 25 5.9 Exit ... 25 - 3 -...

  • Page 4: Product Overview

    1. PRODUCT OVERVIEW The new ED550 camera is designed with advanced new generation 16-bit DSP which has powerful processing capability to show over 560TVL horizontal resolution. Built-in DNR (Dynamic Noise Reduction) function, the camera performs clear & crisper image in low light and substantial disk-saving effect.

  • Page 5: Specifications

    1.3 Specifications Pickup Device Video Format Scanning System Picture Elements Horizontal Resolution Sensitivity S/N Ratio Electronic Shutter Lens Type True Day/Night: Back Light Comp. Auto Gain Control Auto White Balance Gamma Correction Flickerless Video Output Sync. Mode Motion Detection: Privacy Feature: H-Mirror OSD Menu Vandal Resistant...

  • Page 6: Dimensions

    1.4 Dimensions 2. NAMES AND FUNCTIONS OF PARTS 2.1 Front Panel Internal Sensor Note: Internal Sensor is a Day/Night Switch Sensor. - 6 -...
  • Page 7 - 7 -...

  • Page 8: Back Panel

    2.2 Back Panel (2) (3) (4) (1) Power Input Terminal & Video Output Connector Connect to the appropriate power to each model. Video Output connector is for connecting the video output of the camera to a color monitor or other video devices through a 75 Ohm type coaxial cable with BNC female connector at backside of the camera.

  • Page 9: Installation

    3. INSTALLATION Take off camera's cover first. Fix 3 screws of the bracket firmly to wall or ceiling. Adjust the camera to best angle for viewing. Use the tact switcher at the back panel to make any adjustment if needed. Finally, place the cover back to the camera. Ceiling Mount Wall Mount - 9 -...

  • Page 10: Camera Setup Operations

    4. CAMERA SETUP OPERATIONS This camera utilizes an On Screen Display (OSD) user setup menu. 4.1 Setup Button To set items on the user setup menu, use the following switch on the back panel. Up: Adjust the switch to move the cursor upwards. This is used to select the item need to be set.

  • Page 11: Display/Close The User Setup Menu Screen

    4.2 Display/Close the user setup menu screen Set button Press the SET button The menu screen will appear on the monitor as the block shown above. Using the cursor switch Adjust the switch to adjust the mode or parameter of settings. III.

  • Page 12: User Setup

    5. USER SETUP 5.1 Lens 1. When the SETUP menu is displayed on the screen, please direct the arrow to point to “LENS” by adjusting the switch to UP or DOWN direction. SETUP DC <┘ > LENS SHUTTER WHITE BAL. BACKLIGHT MIDDLE AUTO <┘...
  • Page 13 SETUP LENS MANUAL > SHUTTER WHITE BAL. BACKLIGHT MIDDLE SENS-UP SPECIAL <┘ EXIT ESC: The shutter speed can automatically be controlled. When ESC mode turns on, the auto control of the shutter speed can be performed according to the brightness of the screen.

  • Page 14: White Balance Control

    5.3 White Balance Control The screen color can be adjusted by using the WHITE BALANCE function. 1. Please direct the arrow to point to “WHITE BAL” on the SETUP menu by adjusting the switch to UP or DOWN direction. 2. Please select the mode you would like to operate by adjusting the switch to LEFT or RIGHT direction.

  • Page 15: Backlight

    5.4 Backlight Even there is a massive backlight behind the object, bright images of the background and the object can still be obtained by using the BACKLIGHT function. 1. Please direct the arrow to point to “BACKLIGHT” on the SETUP menu by adjusting the switch to UP or DOWN direction.

  • Page 16: Dnr (Dynamic Noise Reduction)

    5.6 DNR (Dynamic Noise Reduction) Dynamic Noise Reduction in video images has the following effects. 1. Images are brighter and sharper. 2. When the level of noise is reduced, the performance of a camera can apparently be improved. 3. When it is recorded digitally, reduced noise can reduce image file size. As the level of gain changes, the background noise in the low light level automatically decreases.

  • Page 17: Special

    SETUP DC <┘ LENS SHUTTER WHITE BAL. BACKLIGHT MIDDLE AUTO <┘ > SENS-UP SPECIAL <┘ EXIT OFF: The function is disabled. NOTE: 1. When SHUTTER is in the manual mode, SENS UP will be disabled. 2. When AGC is turned off, SENS-UP will be disabled. 2.

  • Page 18: Camera Id

    SPECIAL > CAMERA ID COLOR ADJ. <┘ SYNC. MOTIION DET PRIVACY MIRROR ON <┘ SHARPNESS RESET RETURN <┘ 5.8.1 CAMERA ID Input the camera ID, and it will be appeared on the monitor. 1) Please direct the arrow to point to “CAMERA” by adjusting the switch to UP or DOWN direction.

  • Page 19: Color Adj

    5.8.2 COLOR ADJ Adjust the Color Gain from 0 ~ 15 SPECIAL CAMERA ID > COLOR ADJ. <┘ SYNC. MOTIION DET PRIVACY MIRROR ON <┘ SHARPNESS RESET RETURN <┘ 5.8.3 SYNC There are two SYNCHRONIZATION modes: INTERNAL and EXTERNAL LINE-LOCK. In LINE-LOCK mode, without a synchronous generator, it synchronizes the video signal between cameras.
  • Page 20 SPECIAL CAMERA ID COLOR ADJ. <┘ SYNC. ON <┘ > MOTIION DET PRIVACY MIRROR ON <┘ SHARPNESS RESET RETURN <┘ Please select the area you would like to detect from the 4 areas in AREA SEL mode. Please select ON mode for the chosen area. Please adjust the switch to UP or DOWN direction to move between TOP, DOWN, LEFT and RIGHT for adjusting the size of the area to be detected.
  • Page 21 2. Increase DOWN scale value by 20. AREA1 position after change is: TOP: 10, DOWN: 45, LEFT: 20 and RIGHT: 40. AREA1 3. Increase TOP scale value by 20. AREA1 position after change is: TOP: 30, DOWN: 45, LEFT: 20 and RIGHT: 40. AREA1 4.

  • Page 22: Privacy

    5.8.5 PRIVACY This mode covers the areas you do not want to see on the screen. 1) Please direct the arrow to point to “PRIVACY” by adjusting the switch to UP or DOWN direction. 2) Select “ON” by adjusting the switch to LEFT or RIGHT direction. 3) Press SET button.
  • Page 23 1. The original position of AREA1 was TOP: 10, DOWN: 25, LEFT: 20 and RIGHT: 40. AREA1 2. Increase DOWN scale value by 20. AREA1 position after change is: TOP: 10, DOWN: 45, LEFT: 20 and RIGHT: 40. AREA1 3. Increase TOP scale value by 20. AREA1 position after change is: TOP: 30, DOWN: 45, LEFT: 20 and RIGHT: 40.

  • Page 24: Mirror

    In order to save the changes and complete the setting, press the SET button. This allows you to return to the previous menu. 5.8.6 MIRROR -ON: Sets a horizontal image inversion. -OFF: Disable the inversion. SPECIAL CAMERA ID COLOR ADJ. <┘ SYNC.

  • Page 25: Return

    5.8.9 RETURN It saves all settings in SPECIAL menu and returns to the SETUP menu. SPECIAL CAMERA ID COLOR ADJ. <┘ SYNC. MOTIION DET PRIVACY MIRROR ON <┘ SHARPNESS RESET > RETURN <┘ 5.9 Exit Save all the setting menus and exit. NOTE: If you quit the Menu without pressing EXIT, all the settings you previously did will NOT be saved.
  • Page 26 Japan Office: 1809 WBG MARIBU East 18F, 2-6 Nakase.Mihama-ku. Chiba city 261-7118, Japan TEL: +81-43-212-8188 FAX: +81-43-297-0081 www.everfocus.com Ihr EverFocus Produkt wurde entwickelt und designed hergestellt qualitativ hochwertigen Materialien und Komponenten, die recycelt und wieder verwendet werden können. Dieses Symbol bedeutet, dass elektrische und elektronische Geräte...

Table of Contents