STARTUP MEMORY (Keyboard: 7)
Perform steps 1-3.
4
Use the [DEC] [INC] buttons or the [0] or [1] keys to specify the GM2/LAST ACCESS
MEMORY setting.
0
1
5
Press the [ENTER] button.
FACTORY RESET (Keyboard: 8)
Perform steps 1-3.
fig.rst
4
The display will indicate "RST."
fig.yes
5
Press the [ENTER] button.
The display will blink "YES."
6
Press the [ENTER] button.
When the PCR starts up, memory number 0 (GM2) will be
loaded into current memory (p. 84) regardless of the state in
GM2 MEMORY
which the power was turned off.
Upon power-up, the PCR-M30/50/80 will recall the mem-
LAST ACCESS
ory that was last recalled or saved into current memory (p.
MEMORY
84).
System settings
93