Use Midi Functionality; Table Of Operating Modes - Edirol PCR-M30 Owner's Manual

Use MIDI functionality

Table of operating modes

You can switch modes at any time, as shown below.
Mode
PLAY mode
(p. 46)
MIDI Channel mode
(MIDI CH)
(p. 48)
Program Change mode
(PROGRAM CHANGE)
(p. 51)
Bank mode
(BANK)
(p. 52)
Panic mode
(PANIC)
(p. 53)
Memory mode
(MEMORY)
(p. 54)
Snapshot mode
(SNAPSHOT)
(p. 55)
Edit mode
(EDIT)
(p. 56)
You are returned to Play mode once a setting or a process has been completed within the other
modes. If you want to return to Play mode without completing a setting or operation, press the
button for the current mode (i.e., the button that is lit). Alternatively, press the [CANCEL]
button. The setting you were in the process of making will be discarded.
Switching modes
When you turn on the power, the PCR-M30/50/
80 will start up in PLAY mode.
Press the [MIDI CH].
Press the [PGOGRAM
CHANGE].
Simultaneously, press the
[PGOGRAM CHANGE]
and the [MIDI CH].
Simultaneously, press the
[PGOGRAM CHANGE]
and the [EDIT].
Press the [MEMORY].
Simultaneously, press the
[MEMORY] and the [MIDI
CH].
Press the [EDIT].
Explanation
Transmit MIDI messages
by playing the keyboard
or operating the control-
lers.
Set the transmit channel
(Current channel (p. 48))
for the keyboard, bender
lever.
Transmit program change
messages on the Current
channel (p. 48).
Transmit bank select mes-
sages (MSB, LSB) on the
Current channel (p. 48).
Stop "stuck" notes or oth-
er problems with the
sound on a connected
MIDI sound module.
Recall a memory set from
internal memory into the
current memory (p. 84).
Transmit the current val-
ues of controllers ([R1--
R8] or [S1--S8]) at once.
Assign MIDI messages to
the controllers, transmit/
receive bulk data, or make
system settings.
45