Examples Of Assigning System Exclusive Messages - Edirol PCR-M30 Owner's Manual

Examples of assigning system exclusive messages

• GM2 System On ..................................................................... (p. 77)
• Master Volume ........................................................................ (p. 78)
• Bend Pitch Control ................................................................ (p. 79)
■ GM2 System On
F0 7E 7F 09 03 F7
Here's how to assign a GM2 System On system exclusive message in Basic mode.
1. Press the [EDIT] button.
The display will indicate "EDT."
2. Slightly move the controller to which you want to assign the system exclusive message. In
the case of a button, press that button.
The display will indicate the number of the selected controller.
3. Confirm what's indicated, and press the [ENTER] button.
4. Press the [SYSTEM Ex.] key.
The display will indicate "SE0."
5. Confirm what's indicated, and press the [ENTER] button.
The display will indicate "F0," which is the first byte (beginning status) of a system exclusive
message. This cannot be changed. (This cannot be changed.)
6. Confirm what's indicated, and press the [ENTER] button.
7. Use the [7] and [E] keys to input the second byte "7E."
8. Confirm what's indicated, and press the [ENTER] button.
9. Use the [7] and [F] keys to input the third byte "7F."
10. Confirm what's indicated, and press the [ENTER] button.
Input the fourth and fifth bytes in the same way.
11. Finally, use the [F] and [7] keys to input the ending status byte "F7."
12. Confirm what's indicated, and press the [ENTER] button.
13. Specify the output port. (➔"Specifying the port" (p. 59))
14. If you are making an assignment for a button, specify the button mode.
(➔"Specifying the button mode" (p. 59))
The GM2 System On message has now been assigned.
Use MIDI functionality
77