Use MIDI functionality
Setting the MIDI Transmit Channel
To control your sound module, set the PCR-M30/50/80's current channel to the MIDI receive channel
that's selected on your sound module. Use MIDI Channel mode to set the current channel.
Current channel
The current channel is the transmit channel for the keyboard, Bender Lever.
* Each controller has its own independent transmit channel setting.
However, if OMNI mode (p. 49) is on, the controllers will also transmit on the current channel you specify here.
MIDI Channel mode (MIDI CH)
fig.MIDIch-1
3
fig.MIDIch
1
Press the [MIDI CH] button.
The [MIDI CH] button will light. The display will show the current channel
setting.
* The [HEX] or [DECIMAL] button will also light according to the input mode (p. 49).
2
Use the [DEC] [INC] buttons or the [0]-[F] keys of the keyboard to specify the desired channel
number.
Change the current value by -1
DEC
INC
Change the current value by +1
00-0F The input value
HEX...00-0F
DECIMAL...1-16
3
Press the [ENTER] button.
The setting will be cancelled if you press another button instead of the [ENTER] button.
The current channel has now been set.
48
1 2