Assign Midi Messages; Edit Mode (Edit) - Edirol PCR-M30 Owner's Manual

Use MIDI functionality

Assign MIDI messages

You can assign the following functions to a controller.
You will use Edit mode to assign MIDI messages.
MIDI Message
NOTE
AFTERTOUCH
CONTROL CHANGE
PROGRAM CHANGE
RPN
NRPN
Sys Ex
TEMPO (20-250)
* You can copy assigned messages to another controller, or cancel an assignment. For details, refer to
Copying a MIDI message assignment (p. 82) or Canceling a MIDI message assignment
(p. 83).
* If you want to assign a single-byte system message (system realtime message, tune request) or a freely
specified message of up to 24 bytes, refer to "SYS EX. ASSIGN" (p. 72).

Edit mode (EDIT)

fig.Edit-1_80
How Basic mode and Advanced mode differ
The assignments NOTE, AFTERTOUCH, CONTROL CHANGE, PROGRAM CHANGE, RPN, NRPN,
Sys Ex. can be made either in Basic mode or Advanced mode.
Use the mode that is appropriate for your purpose.
• Basic mode
• Advanced mode :A greater number of steps are required, but you can specify more parameters
* For these assignments, the rightmost digit (third place) in the display is a number that indicates the mode
(Basic mode or Advanced mode).
56
➔NOTE ASSIGN (p. 57)
➔AFTERTOUCH ASSIGN (p. 60)
➔CONTROL CHANGE ASSIGN (p. 63)
➔PROGRAM CHANGE ASSIGN (p. 66)
➔RPN / NRPN ASSIGN (p. 69)
➔RPN / NRPN ASSIGN (p. 69)
➔Sys Ex. ASSIGN (p. 72)
➔TEMPO ASSIGN (p. 81)
:You can make assignments easily, with the minimum number of steps.
and make more sophisticated assignments.
Assigning method