Windows Me/98 Users - Edirol PCR-M30 Owner's Manual

Windows Me/98 users

1
With the PCR disconnected, start up Windows.
Disconnect all USB cables except for a USB keyboard and USB mouse (if
used).
If you are using virus checking or similar software, be sure to exit it as well.
2
Exit all currently running software.
Also close any open windows. If you are using virus checking or similar
software, be sure to exit it as well.
3
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your computer.
4
Click the Windows Start menu. From the menu that appears, select Run....
The "Run..." dialog box will appear.
fig.05-13
5
In the dialog box that appears,
input the following into the
"Open" field, and click [OK].
(drive name): \Driver\USB_ME98\SETUPINF.EXE
The SetupInf dialog box will appear.
You are now ready to install the driver.
* In the explanatory example shown here, the drive name is given as "D:." The drive
name "D:" may be different for your system. Specify the drive name of your CD-
ROM drive.
6
Use the USB cable to connect the PCR-M30/50/80 to your computer.
1. With the power switch turned OFF, connect the AC adaptor to the
PCR-M30/50/80.
2. Connect the AC adaptor to an electrical outlet.
3. Use the USB cable to connect the PCR-M30/50/80 to your computer.
7
Set the PCR-M30/50/80's power switch to the ON (DC) position.
8
In the SetupInf dialog box, click [OK].
Next, make device settings.
(➔Settings and checking (p. 26))
Getting Connected and Installing Drivers (Windows)
To check the drive name
In the Windows desktop,
double-click the My
Computer icon. In the
window that appears,
check the drive name of
the CD-ROM drive into
which you inserted the
CD-ROM in step3.
The drive name is the (D:)
or (E:) displayed by the
CD-ROM drive .
Once the connections have
been completed, turn on
power to your various
devices in the order
specified. By turning on
devices in the wrong
order, you risk causing
malfunction and/or
damage to speakers and
other devices.
This unit is equipped with
a protection circuit. A brief
interval (a few seconds)
after power up is required
before the unit will operate
normally.
If a message recommends
that you restart Windows,
restart Windows as
directed.
25