USB connections with your computer
- Using the PCR-M30/50/80 as a MIDI interface -
* If you want to use Media Player to play a sound module connected to the PCR's MIDI OUT connector,
make driver settings as described in "Settings and checking~Specifying the MIDI input/
output destination~" (p. 26).
fig.connect-MIDI-IF
MIDI sound module (sold separately)
USB cable
EV-5
(sold separately)
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and
turn off the power on all devices before making any connections.
* Use only the specified expression pedal (EV-5; sold separately). By connecting any other expression
pedals, you risk causing malfunction and/or damage to the unit.
MIDI flow
Turn MIDI I/F MODE ON as described in "MIDI I/F MODE" (p. 94).
fig.flow-USB-b
MIDI I/F MODE ON
PC
MIDI OUT DEVICE
EDIROL PCR MIDI OUT
EDIROL PCR
MIDI IN DEVICE
EDIROL PCR MIDI IN
EDIROL PCR 1
EDIROL PCR 2
BULK RECEPTION
PORT 1
PORT 2
BULK TRANSMISSION BULK data is transmitted from here
* For an explanation of the items in the diagram, refer to "Input / output devices" (p. 43).
MIDI IN
MIDI OUT
DP series
(sold separately)
MIDI
MIDI
MIDI
MIDI
OUT
OUT
IN
IN
PCR-M1
USB
BULK RECEPTION
PORT 1
PORT 2 /
BULK TRANSMISSION
BULK data is received here
Of the keyboard, bender lever, and other controllers, those that have been set to
PORT 1 will transmit data from here
Of the keyboard, bender lever, and other controllers, those that have been set to
PORT 2 will transmit data from here
Basic connections and MIDI flow
It is not necessary to connect the AC
adaptor if you are using a USB connection.
However, with some computers, the PCR-
M30/50/80 may not operate when powered
from the USB bus. In this case, set the
power switch to the DC position and
connect the AC adaptor.
MIDI OUT
MIDI IN
AC adaptor
41